{{results.messages.text}}
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: suzuki Placement on Vehicle: Front Surface Finish: original hi, this starter motor was removed from a running 1975 suzuki gt750 water buffalo. everything here has been inspected, tested, and is i...
{{results.messagesById['http://www.2040-parts.com/suzuki-gt750-water-buffalo1972-77-triple-engine-starter-motor-08186-i798774/']}}
Condition: Used Here we have a snowmobile clutch for auction. The details are as follows: Item: This is a clutch off of a 2003 Ski-Doo rev; it fits all of the 800 rev motors and will fit any 35mm Ski-Doo crankshaft; However, it is only calibrated for the 2003 800 non-HO, but it most certainly can be recalibrated. Condition: This clutch is SO CLEAN that it is an absolute 10 pointer! Shipping: We...
{{results.messagesById['http://www.2040-parts.com/ski-doo-clutch-for-800cc-twin-engine-rev-super-clean-amp-free-shipping-i1355228/']}}
Condition: Remanufactured Here we have an outboard crankshaft for auction. The details are as follows: Item: Crankshaft for OMC/Johnson/ Evinrude 3 cylinder outboard; FITS 60-70 horsepower, 1997 and newer models with the fine spline ; This is a fresh water crankshaft; Retail price on this item is $1,025.82!! Condition: Freshly Remanufactured Shipping: We use UPS exclusively. It will cost $20 to...
{{results.messagesById['http://www.2040-parts.com/omc-johnson-evinrude-outboard-engine-crankshaft-clean-60-70-hp-3-cylinder-i1917569/']}}
Condition: Used ITEM: Here we have a master repair manual for vintage Kohler manual. It covers a variety of old two stroke motors, and it looks like it was printed in the early 1970s. Some of the engines listed are K309-1, K399-2, K295-1 and many more. A very cool find!! CONDITION: Other than a little dust, this binder and it's contents are in great shape! SHIPPING: We ship with UPS exclusively...
{{results.messagesById['http://www.2040-parts.com/kohler-engine-repair-manuals-two-cycle-motors-1970s-vintage-rare--i2218491/']}}
Condition: Remanufactured Here we have an outboard crankshaft for auction. The details are as follows: Item: Crankshaft for OMC/Johnson/ Evinrude 3 cylinder outboard; FITS Mirage 25-35 horsepower, 1996 and newer; This is a fresh water crankshaft; Retail price on this item is $1,164.16!! Condition: Freshly Remanufactured Shipping: We use UPS exclusively. It will cost $20 to anywhere in the lower...
{{results.messagesById['http://www.2040-parts.com/johnson-evinrude-omc-outboard-engine-crankshaft-mirage-3-cylinder-remaned--i1917570/']}}
Condition: Remanufactured Here we have a snowmobile motor for auction. The details are as follows: Item: This is a Ski Doo/Rotax snowmobile motor. It is for the 800cc twins. It will fit the 800HO and non-HO from 2002 to 2007. It has a fully remanufactured crankshaft with all new rods and bearings, two freshly re-plated cylinders, new dual ring pistons , pins, clips, caged rod bearings, all new ...
{{results.messagesById['http://www.2040-parts.com/ski-doo-engine-800ho-non-ho-snowmobile-core-is-required-fully-remanufactured-i1306822/']}}
Condition: Remanufactured Brand: Ski-Doo Warranty: No Manufacturer Part Number: n/a Country/Region of Manufacture: Unknown Here we have a snowmobile motor for sale. The details are as follows: Item: This is a Ski Doo/Rotax snowmobile motor. It is for the 800R motor in the 2007 Summit or XRS snowmobiles. It has a fully remanufactured crankshaft with all new rods and bearings, a freshly re-plated...
{{results.messagesById['http://www.2040-parts.com/ski-doo-engine-for-2007-800r-snowmobile-core-is-required-fully-remanufactured-i2346911/']}}
Condition: Used *ITEM: Here we have a crankcase for a triple Arctic Cat snowmobile. It's off of a ZRT, but will fit many models of the 800 and 900 3 cylinder engines. It is in good shape with no cracks, holes or excessive wear. *SHIPPING: We ship with UPS exclusively. Shipping will be $20 to any of the lower 48 United States. If you live outside of this area, please contact us for a shipping qu...
{{results.messagesById['http://www.2040-parts.com/arctic-cat-snowmobile-crankcase-3-cylinder-800-and-900-cc-engines-i2222789/']}}
Condition: New Brand: Fram Manufacturer Part Number: PH16 Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Click Here. Double your traffic. Get Vendio Gallery - Now FREE! THIS AUCTIO N IS FOR A NEW IN ORIGINAL BOX FRAM ENGINE OIL FILTER - EXTRA GUARD PH16 WITH 3X ENGINE PROTECTION. Brand: Fram Part Number: PH16 Item Condit...
{{results.messagesById['http://www.2040-parts.com/fram-engine-oil-filter-extra-guard-ph16-with-3x-engine-protection-i1421499/']}}
Condition: New About Us: We are a full machine shop and parts warehouse w/ Superflow dynomometer testing facility located in NE Indiana only minutes away from Ohio and Michigan. We have many other custom parts and engine combinations available utilizing factory and aftermaket engine blocks with forged and billet crankshafts. We offer engines with billet steel 4-bolt mains, nitride hardened forg...
{{results.messagesById['http://www.2040-parts.com/632-ci-custom-marine-engine-700-horsepower-700-ft-lbs-torque-2500rpm--i1681859/']}}
Condition: Remanufactured FRESH 461 BIG BLOCK CHEVY ENGINE. PERFECT FOR PUMP GAS, 9.7:1 COMPRESSION, .030 OVER GM 4 BOLT BLOCK, 049 GM OVAL PORT HEADS WITH NEW BRONZE GUIDE LINERS, STAINLESS STEEL VALVES, COMP SPRINGS, RETAINERS AND LOCKS, EDELBROCK TORKER 2-O INTAKE, GM EXTERNALLY BALANCED .010-.010 CRANKSHAFT, NEW EAGLE I BEAM RODS (PRESS PIN), NEW SEALED POWER FORGED PISTONS AND MOLY RINGS, ...
{{results.messagesById['http://www.2040-parts.com/461-c-i-big-block-chevy-engine-street-strip-drag-race-marine-street-rod-454-i1592097/']}}
Condition: New Brand: FORD Manufacturer Part Number: 438FORD 438 FORD 10.8:1 COMPRESSION PUMP GAS ENGINE. 630 H.P. AND 640 FT. LBS. TQ. WORLD PRODUCTS MAN-O-WAR SPORTSMAN BLOCK, SCAT 4340 CRANKSHAFT(INTERNALLY BALANCED), SCAT H BEAM RODS, SRP FLAT TOP PISTONS, AFR 72CC 205 RENEGADE HEADS AND STUD GIRDLE, SCORPION ROLLER ROCKER ARMS, COMP CAMS HYDRAULIC ROLLER CAM AND LIFTERS, CLOYES BILLET TIMI...
{{results.messagesById['http://www.2040-parts.com/438-ford-stroker-pump-gas-engine-drag-race-street-strip-351w-i1375403/']}}
FRESH 406 CIRCLE TRACK ENGINE. GM 400 BLOCK THAT HAS BEEN BAKED AND BLASTED, PRESSURE CHECK, NEW PRO GRAM ENGINEERING BILLET CENTER MAIN CAPS INSTALLED , SQUARE DECKED, BORED & HONED WITH DECK PLATE, NEW LIFTER VALLEY VENTS INSTALLED AND DRAIN BACKS HAVE BEEN SCREENED OFF, NEW ARP MAIN STUDS, NEW EAGLE 4340 CRANKSHAFT, NEW SCAT 6.000" RODS WITH ARP2000 BOLT UPGRADE, CLEVITE H-SERIES MAIN AND RO...
{{results.messagesById['http://www.2040-parts.com/406-sbc-circle-track-engine-modified-ump-umts-i1592100/']}}
FRESH BUILD DYNO TIME ONLY Brand: bre Manufacturer Part Number: 350st FRESH BUILD 355 C.I. SMALL BLOCK CHEVY ENGINE. .030 OVER 350 4 BOLT MAIN BLOCK .010/.010 STOCK CAST STEEL CRANKSHAFT, RESIZED STOCK I BEAM RODS, SEALED POWER L2256 FORGED FLAT TOP PISTONS AND MOLY RINGS, LUNATI 10120412 BRACKET MASTER .515 LIFT HYDRAULIC FLAT TAPPET CAMSHAFT, NEW CLOYES DOUBLE ROW TIMING SET, NEW .080 WALL PU...
{{results.messagesById['http://www.2040-parts.com/350-355-s-b-c-crate-engine-420hp-420tq-street-rod-hot-rod-muscle-car-i1411256/']}}
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: kawasaki Placement on Vehicle: Front Surface Finish: original hi, this cover was removed from a running 1991 kdx250 kawasaki. everything here has been cleaned, inspected, and is in good overall /...
{{results.messagesById['http://www.2040-parts.com/-kawasaki-kdx-250-200-1990-91-engine-clutch-cover-07890-i799184/']}}
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: kawasaki Placement on Vehicle: Front Surface Finish: original hi, this governor assembly was removed from a running 1991 kdx250 kawasaki. everything here has been cleaned, inspected, and is in go...
{{results.messagesById['http://www.2040-parts.com/-kawasaki-kdx-250-200-1990-91-engine-governor-assembly-07891-i799244/']}}
: ITEM: Here we have an antique control box for an Oliver outboard! The tractor company made outboards for a very short time, and it was comon for there to be two on the back of most boats. This control box is for a dual engine set-up! It is very cool and a very rare find! It's new, never been used, but has been sitting around our shop for a few decades, so it's a little dirty. This would make ...
{{results.messagesById['http://www.2040-parts.com/oliver-outboard-control-box-vintage-synchro-matic-for-dual-engines-new-antique-i609886/']}}
: ITEM: Here we have vinatge Honda motor. I don't know a whole lot about it, but we are guessing it is from a dirt bike or street bike. It is a 350, but I have no idea of the year or anything else. It comes as is, just what is in the pictures. We are pretty sure that it doesn't run. We found it while cleaning some old parts out of our salvage yard, and no one can remember much about it! It must...
{{results.messagesById['http://www.2040-parts.com/honda-350cc-motor-street-bike-dirt-bike-engine-for-parts-i598476/']}}
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: honda Placement on Vehicle: Array Surface Finish: original hi, this engine case set was removed from a running 1981 honda cr80r.everything here has been cleaned, inspected, and is in very good ov...
{{results.messagesById['http://www.2040-parts.com/honda-cr80r-elsinore-1980-81-engine-case-cases-08079-i93325/']}}
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: suzuki Placement on Vehicle: Front Surface Finish: original hi, this starter motor gear set was removed from a running 1972 suzuki gt750 water buffalo. everything here has been inspected, tested,...
{{results.messagesById['http://www.2040-parts.com/suzuki-gt750-water-buffalo1972-triple-engine-starter-gear-drive-gear-08107-i93341/']}}
Post Ad